2602-012 - Hurst 2602-012 - Synchronous Motor, 115VAC 60Hz, 4RPM Simple Type:...
- Part Number:
- 2602-012
- Model Number:
- 2602-012
- Make:
- HURST
- Lead Time:
- Available
- Qty In Stock:
- Available
Hurst 2602-012 - Synchronous Motor, 115VAC 60Hz, 4RPM Simple Type: Motor & Drive
Series T geared synchronous motor. Reversible, permanent magnet synchronous series T geared motors are available in a wide range of speeds. The gear trains are the most rugged with a maximum recommended loading of 250 ounce inches at 1 RPM. All gears are hobbed to AGMA 7 quality. Pinions are extruded from a special steel with a modified long addendum tooth form to provide higher strength. Pinions are held to the same AGMA 7 quality level as the gears. Both pinion and gear teeth are case hardened for wear resistance and rotate upon hardened and ground steel studs. Standard motors are 115V, 60Hz bu other voltages may be specified. Sleeve bearings are standard. Capacitors are required for operation and must be used in the circuit even if the motor is used in a unidirectional mode.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Directional Reliability
- Good Torque-to-Size Ratio at Moderate Cost
- Permanent Magnet Construction Provides Inherent Dynamic Braking and Low Rotor Speed
- Quiet Operation
- Rapid Acceleration
Specifications
- Bearing Type: Sleeve
- Capacitor Value: 0.68 µF
- Dimensions: 2-17/32 in. L x 2-3/8 in. W
- Frequency, Operating: 60 Hz
- Gear Type: T
- Power, Input: 7 W
- Reduction: 75
- Speed: 4 RPM
- Speed, Output: 4 RPM
- Torque: 218 Oz.-In.
- Type: AC Synchronous Geared
- Voltage, Nominal: 115 VAC
- Voltage, Rating: 115 VAC
- Weight: 27 Oz.
Applications
- None Available
Aliases
- None Available
